Excellent vehicle condition. Inspection passed. Vehicle condition better than 95% of vehicles for sale. Excellent vehicle condition. 0 previous ownership transfers.
This vehicle is less than one year old, with a short usage period, an average annual mileage of 100 kilometers, and extremely low daily usage frequency. It is a one-owner vehicle with zero ownership transfers. The exterior is in excellent condition, with a glossy paint and no obvious signs of use. The interior is clean and tidy, with no obvious signs of use. The overall body frame is intact and without any abnormalities. The fluids are normal with no leaks, and the power system operates smoothly without any abnormalities.
The "usage type" section on the vehicle registration certificate has legal validity. Any vehicle that changes from "commercial" to "non-commercial" has a usage intensity far exceeding that of personal vehicles, and we will label these prominently. Such vehicles are usually cheaper but have more severe mechanical wear.
A proper inspection relies on equipment, not just eyes. The inspector should use a paint thickness gauge to measure 50-60 points across body panels; original paint is typically 80-150 microns. An OBD diagnostic scanner reads stored and pending fault codes across all control units, and for EVs it also reads battery state of health and charge cycle counts. The car must go on a lift for the underbody check: frame rails, suspension components, oil leaks and accident repair marks are only visible from below. A battery tester checks starting voltage and charging system health, and a tread depth gauge documents tire condition. Ask for the report to include raw readings and dated photos rather than a simple pass/fail summary - that is what makes it verifiable.
We use a calibrated high-precision paint thickness gauge to take multiple measurements on at least 13 metal surfaces of the entire vehicle. The original paint thickness of mainstream Chinese models typically ranges from 90μm to 150μm. If any area exceeds 200μm or even reaches over 500μm, we will directly conclude that the area has undergone bodywork and filler repair.
