In stock. Guaranteed no accidents, no water damage, no fire damage; mileage guaranteed; original condition, one owner, in excellent condition. Changan CS55, registered June 2018, 1.5T automatic, Dynamic Edition, insurance until June 2026. Original condition, one owner, mileage just over 50,000 km, National V emission standard. Very affordable price, installment payment available, transfer and registration included. Can be arranged by a dealer. Panoramic sunroof, with dual side and front/rear head airbags, LCD instrument panel, blind spot monitoring, rain-sensing wipers, tire pressure monitoring, leather sports seats, one-touch power windows, anti-pinch windows, power folding and auto-folding mirrors, rear air vents, LED daytime running lights, automatic headlights, 18-inch tires, etc.
Our legal red line is that the amounts on the China Customs declaration, export license, commercial invoice, and bank receipt must be consistent across all four documents. We firmly refuse to engage in the illegal act of issuing "false low-value invoices" to assist buyers in evading customs duties in the destination country.
A proper inspection relies on equipment, not just eyes. The inspector should use a paint thickness gauge to measure 50-60 points across body panels; original paint is typically 80-150 microns. An OBD diagnostic scanner reads stored and pending fault codes across all control units, and for EVs it also reads battery state of health and charge cycle counts. The car must go on a lift for the underbody check: frame rails, suspension components, oil leaks and accident repair marks are only visible from below. A battery tester checks starting voltage and charging system health, and a tread depth gauge documents tire condition. Ask for the report to include raw readings and dated photos rather than a simple pass/fail summary - that is what makes it verifiable.
We use two steps: 1. Insert a medical-grade endoscope through the spark plug hole to visually inspect cylinder wall scratches and carbon buildup on the piston top; 2. Extract an engine oil sample to check for large metal debris or emulsification (caused by coolant leakage).
