Basic Information

BrandBYD
SeriesXia
Year2025
First Registration2025/01
Mileage0.45km
Transfer Count-
FuelPHEV
TransmissionE-CVT
Engine1.5T 156 L4
ColorWhite
Seats7seats

Condition Description

Internal Description: Ground Floor 1. Actual Mileage: 0.45 million km 2. Number of Ownership Transfers: 0 3. Number of Keys: 1 4. Compulsory Traffic Accident Liability Insurance: January 2027 5. Inspection Date: January 2027 6. Traffic Violations: None 7. Mortgage Status: No 8. Vehicle Condition: Right rear door repainted, right rear tire replaced. 9. 4S Store Records: None 10. Insurance Records: Checked 11. Added or Modified Parts: None 12. Third-Party Inspection Completed: Double S 13. Vehicle Condition and Configuration Confirmer: Jie Jiahao 14. Re-inspection Condition: Right rear door bodywork and repainting 15. Preparation Suggestions: None

Configuration Highlights

✓Driver/Passenger Airbags
✓Front/Rear Side Airbags
✓Front/Rear Curtain Airbags
✓Knee Airbags
✓Keyless Start System
✓Keyless Entry System
✓Hill Start Assist
✓Auto Hold
✓Hill Descent Control
✓Adaptive Suspension
✓Power Trunk
✓Multifunction Steering Wheel
✓Front Parking Sensors
✓Seat Material
✓Driver/Passenger Power Seats
✓Rear Cupholders
✓GPS Navigation
✓Low Beam Headlights
✓Daytime Running Lights
✓Auto Headlights
✓Adjustable Headlight Height
✓Power Windows
✓Anti-pinch Windows
✓Climate Control Type
✓Rear Independent Climate Control
✓Rear Air Vents
✓Auto Park Assist
✓Blind Spot Assist
✓Lane Departure Warning
✓Active Safety System

Q&A

More

How long does it usually take from when I pay the full amount to when the vehicle is loaded at the port in China?

Under normal circumstances, it takes 15 to 25 working days. This includes: domestic transfer of ownership (3-5 days), applying for an export license (3-5 days), inland trucking to the port (2-5 days), customs inspection and waiting for loading schedule (5-10 days). Do not trust false promises from other channels claiming 'loading within a week.'

For PHEV plug-in hybrid models, are you responsible if overseas technicians do not follow the dedicated hybrid mode for exhaust during oil changes, leading to engine overheating?

This is a typical case of "secondary damage caused by unprofessional rescue." Many hybrid vehicles require access to "maintenance mode" via engineering computers to allow the water pump to run at full speed for exhaust. We do not bear any moral or financial responsibility for cylinder damage caused by local technicians' misoperation.

What tools and equipment does a professional pre-shipment inspection of a used car use?

A proper inspection relies on equipment, not just eyes. The inspector should use a paint thickness gauge to measure 50-60 points across body panels; original paint is typically 80-150 microns. An OBD diagnostic scanner reads stored and pending fault codes across all control units, and for EVs it also reads battery state of health and charge cycle counts. The car must go on a lift for the underbody check: frame rails, suspension components, oil leaks and accident repair marks are only visible from below. A battery tester checks starting voltage and charging system health, and a tread depth gauge documents tire condition. Ask for the report to include raw readings and dated photos rather than a simple pass/fail summary - that is what makes it verifiable.

BYD Xia 1.5T 156 L4

比亚迪 夏 2025款 DM-i 1.5T 180km 超越型

EXW: $31,939
Car CodeSWA1622728
Publish Date2026/02/10